12-port gigabit industrial PoE switch

Overview

The SmartByte LT-IS6012GP-4GX8GT is the highly reliable industrial PoE switch with 8-port 10/100/1000-T PoE and 4-port 1000Base-X SFP slots. It complies with IEEE802.3af, IEEE802.3at standard PoE protocol, the Max power consumption can reach 30W (PoE+) per port. Moreover, it is also featuring with port isolation, 250m long distance transmission mode(1-4 ports), QoS(1-2 ports) and PoE watchdog function, which all can be configured by the Dip switch on the top panel.

LT-IS6012GP-4GX8GT is a high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, including wide range power input 44-57VDC, redundant power design with polarity reverse/over-voltage/over-current protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and crucial.

Features

➢ 8*10/100/1000Base-T RJ45 PoE ports, 4*1000Base-X SFP slots

➢ DC 44-57V input, redundant power supply with polarity reverse/over-voltage protection

➢ Support one channel output relay alarm(terminal block Pin 5/6)

➢ Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard

➢ Support powerful Dip switch function: 1. Link aggregation; 2. 250m long distance(1-4 ports); 3. QoS(1-2 ports) ; 4.PoE watchdog

➢ Support 10K Bytes Jumbo frame

➢ Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection

➢ IP40 fan-less and Din-rail hardware design

➢ Operation temperature: -40 ℃ ~+75℃

Model No.	LT-IS6012GP-4GX8GT
Interface	Fiber ports	Copper RJ45 ports
	4	8
Ethernet	810/100/1000Base-T PoE 41000Base-XSFP
Alarm port	One relay output for power failure. Alarm relay current carry ability: 1A@24VDC
Standard	IEEE 802.310Base-TEthernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet IEEE 802.3af Power-Over-Ethernet IEEE 802.3at Power Over Ethernet plus PSE
Dip Switch	1. Link aggregation 2. 250m long distance mode(1-4 ports) 3. QoS(1-2 ports） 4. PoE watchdog
LED Indicators
P(Power indicator) Green	Off: the device is power off or failed
	On: the device power on is normal
S(PoE usage indicator) Red	Off: total PoE usage＜rated 50%
	Blinking: rated 50%＜total PoE usage＜rated 90%
	Normal on: total PoE usage≥rated 90%
1-8(Copper ports)	Green indicators	Yellowindicators
	Off: ports link down	Off: PoE not working
	On: ports link up	On: PoE working
	Blinking: data on TX/RX
9-12(Fiber ports)Green	Off: ports link down
	On: ports link up
	Blinking: data on TX/RX
Power parameters
Input voltage	44-57VDC, redundant power input
Input current	5.7A Max
Total power consumption	Full loading without PoE ≤10W PoEpower budget≤240W
Connector	Removable 4-pin terminal block
Reverse polarity protection	Support
Over-voltage protection	Support
Over-current protection	Support
Switching features
Switching capacity	24G
Packet forwarding rate	35.7 Mpps
MAC address table	8K
VLAN	4K
Buffer	2M
Forwarding delay	<5us
Jumbo Frame	Support 10Kbytes
MDX/MIDX	Support
Watchdog	Support
Network Topology
Star topology	Support
Bus topology	Support
Tree Topology	Support
Mechanical structure
Case protection	IP40
Installation method	Din-rail
Dimension(WDH)mm	54115158mm
Weight	1.15 kg
Operating environment
Operating temperature	-40℃~+75℃
Storage/transportation temperature	-40℃~+85℃
Relative humidity	5%~95%（non-condensing）
Industry standard	EMI：FCC Part 15B Class A
	Surge protection of power: IEC 61000-4-5 6KV/4KV（8/20us）
	Surge protection of Ethernet ports：IEC 61000-4-5 6KV/2KV（10/700us）
	RS: IEC 61000-4-3 80 MHz-1 GHz：10 V/m
	EFT: IEC 61000-4-4 power interface: 4K；Ethernet ports: 2K
	CS: IEC 61000-4-6 10V
	ESD: IEC 61000-4-2 Level 4（8K/15K）
	Shock: IEC 60068-2-27
	Free fall: IEC 60068-2-32
	Vibration: IEC 60068-2-6
Certification	CCC/CE/FCC/RoHS
Warranty	5 years

LT-IS6012GP-4GX8GT datasheet

Model	Description
LT-IS6012GP-4GX8GT	Industrial PoE switch with 810/100/1000Base-T RJ45 PoE ports and 41000Base-X SFP slots, complies with IEEE802.3af, IEEE802.3at standard, DC44-57V input, redundant dual power supply, Din-rail installation. Operation temperature: -40℃～+75℃

Unmanaged Industrial PoE Switches

810/100/1000Base-T PoE + 41000Base-X SFP Industrial PoE Switch

Unmanaged Industrial PoE Switches

8*10/100/1000Base-T PoE + 4*1000Base-X SFP Industrial PoE Switch

810/100/1000Base-T PoE + 41000Base-X SFP Industrial PoE Switch